Command Reference OSPFv2 Commands
[ IfStateChange | NbrRestartHelperStatusChange | NbrStateChange |
NssaTranslatorStatusChange | RestartStatusChange | VirtIfStateChange |
VirtNbrRestartHelperStatusChange | VirtNbrStateChange ] ]
no enable traps [ error [ IfAuthFailure | IfConfigError | IfRxBadPacket | VirtIfAuthFailure |
VirtIfConfigError | VirtIfRxBadPacket ] | lsa [ LsdbApproachOverflow | LsdbOverflow |
MaxAgeLsa | OriginateLsa ] | retransmit [ IfTxRetransmit | VirtIfTxRetransmit ] | state-change
[ IfStateChange | NbrRestartHelperStatusChange | NbrStateChange |
NssaTranslatorStatusChange | RestartStatusChange | VirtIfStateChange |
VirtNbrRestartHelperStatusChange | VirtNbrStateChange ] ]
Configures all traps switches related to errors. Use this parameter to
set the following specified error traps switches.
Interface authentication error
Interface parameter configuration error
Error packets received on the interface
Authentication error on the virtual interface
Parameter configuration error on the virtual
interface
Error packets received on the virtual
interface
Configures all traps switches related to the LSA. Use this parameter
to set the following specified LSA traps switches.
External LSA count has reached the
90% of the upper limit.
External LSA count has reached the
upper limit.
LSA reaching the aging time
Configures all traps switches related to the retransmission. Use this
parameter to set the following specified retransmit traps switches.
Packet retransmission on the interface
Packet retransmission on the virtual interface
Configures all traps switches related to the state change. Use this
parameter to set the following specified state-change switches.
NbrRestartHelper
StatusChange
State change during the
neighbor GR process
NssaTranslatorStatusChange
State change of the NSSA
translator
State change of the GR
Restarter on the device