7 CARE AND MAINTENANCE
7.40 MHL360 E
7.7.3.3 Changing fuel filters
►
Place a suitable container under the fuel
filters (282/1).
►
Clean the outside of the fuel filter cartridg-
es (282/1).
►
Unscrew the filter cartridges (using a tight-
ening strap wrench if necessary).
►
Collect the fuel and dispose of filter car-
tridges according to regulations.
►
Clean the filter heads and check their con-
dition.
►
Wet the seals or fuel filter cartridges with
oil or diesel fuel.
►
Screw on the new fuel filter cartridges and
tighten firmly by hand.
►
Tighten the fuel filter cartridges another ½
turn.
There is no need to vent the fuel system.
►
After a trial run, check the fuel filter for
leaks.
Fig. 282 Fuel filter
To Next Page
Loading...
