Arm
®
CoreLink™ GIC-600AE Generic Interrupt Controller
Technical Reference Manual
Document ID: 101206_0003_04_en
Issue: 04
Introduction
1. Introduction
1.1 Product revision status
The rxpy identifier indicates the revision status of the product described in this manual, for
example, r1p2, where:
rx Identifies the major revision of the product, for example, r1.
py Identifies the minor revision or modification status of the product, for
example, p2.
1.2 Intended audience
This book is written for system designers and programmers who are designing or programming a
System on Chip (SoC) that uses the GIC-600AE.
1.3 Conventions
The following subsections describe conventions used in Arm documents.
Glossary
The Arm
®
Glossary is a list of terms used in Arm documentation, together with definitions for
those terms. The Arm Glossary does not contain terms that are industry standard unless the Arm
meaning differs from the generally accepted meaning.
See the Arm Glossary for more information: developer.arm.com/glossary.
Convention Use
italic Citations.
bold Terms in descriptive lists, where appropriate.
monospace Text that you can enter at the keyboard, such as commands, file and program names, and source code.
monospace underline A permitted abbreviation for a command or option. You can enter the underlined text instead of the full
command or option name.
<and> Encloses replaceable terms for assembler syntax where they appear in code or code fragments.
For example:
MRC p15, 0, <Rd>, <CRn>, <CRm>, <Opcode_2>
Copyright © 2018–2020, 2022 Arm Limited (or its affiliates). All rights reserved.
Non-Confidential
Page 12 of 268
To Next Page
Loading...
Need help?
General
