Arm
®
CoreLink™ GIC-600AE Generic Interrupt Controller
Technical Reference Manual
Document ID: 101206_0003_04_en
Issue: 04
About the GIC-600AE
See 4.2 Interrupt groups and security on page 50 for more information about security and
groupings.
For more information about Exception levels, see the Arm
®
Architecture Reference
Manual Armv8, for A-profile architecture.
Performance monitoring
The GIC-600AE provides the following performance monitoring features:
•
Performance Monitoring Unit (PMU) counters with snapshot functionality.
Error correction
The GIC-600AE provides the following error correction features:
•
Armv8.2 Reliability Accessibility Serviceability (RAS) architecture-compliant error reporting for:
◦ Software access errors
◦ ITS command and translation errors
◦ Error Correcting Code (ECC) errors
2.4 Test features
The GIC-600AE provides Design for Test (DFT) signals for test mode.
Related information
Common control signals on page 250
2.5 Product documentation
Documentation that is provided with this product includes a Technical Reference Manual (TRM), a
Configuration and Integration Manual (CIM), a Safety Manual, and a Development Interface Report.
For relevant protocol and architectural information that relates to this product, see 1.4 Useful
resources on page 14.
The GIC-600AE documentation is as follows:
Technical Reference Manual
The TRM describes the functionality and the effects of functional options on the behavior
of the GIC-600AE. It is required at all stages of the design flow. The choices that are made
in the design flow can mean that some behaviors that the TRM describes are not relevant. If
you are programming the GIC-600AE, contact:
Copyright © 2018–2020, 2022 Arm Limited (or its affiliates). All rights reserved.
Non-Confidential
Page 22 of 268
To Next Page
Loading...
Need help?
General
