69 – Passenger protection
1 Safety regulations and test methods
for pyrotechnic, electrical and me‐
chanical components of the restraint
system
Overview
♦ ⇒ „1.1 General safety regulations“, page 95
♦ ⇒ „1.2 Storage, transportation and disposal of airbag, belt ten‐
sioner and battery isolator units (pyrotechnic components)“,
page 96
♦ ⇒ „1.3 Additional safety regulations for side airbag“,
page 97
♦ ⇒ „1.4 Additional safety regulations for curtain airbag“,
page 97
♦ ⇒ „1.5 Safety regulations for crash sensors (pressure sensors)
for front side airbag“, page 98
♦ ⇒ „1.6 Additional safety regulations for working on seat occu‐
pied sensor for front passenger's airbag deactivation - country-
specific“, page 98
♦ ⇒ „1.7 Procedure for dealing with seat occupied sensor for
front passenger's airbag deactivation following a crash - coun‐
try-specific“, page 99
♦ ⇒ „1.8 Replacing pyrotechnic, electrical and mechanical com‐
ponents of restraint system following an accident“, page 99
♦ ⇒ „1.9 Checking airbag fastening elements following an acci‐
dent“, page 101
♦ ⇒ „1.10 Accident not involving airbag triggering“, page 101
♦ ⇒ „1.11 Checking seat belts“, page 102
♦ ⇒ „1.12 Checking webbing“, page 102
♦ ⇒ „1.13 Checking automatic belt retractor (locking action) “,
page 103
♦ ⇒ „1.14 Visual inspection of buckle “, page 104
♦ ⇒ „1.15 Functional test of buckle “, page 104
♦ ⇒ „1.16 Checking guide fittings and latch plate “, page 104
♦ ⇒ „1.17 Checking fastening elements and anchorage points
following an accident“, page 104
♦ ⇒ „1.18 Checking child seat restraint function for additional
child seats (not for driver's seat belt) - country-specific “, page
105
♦ ⇒ „1.19 Checking child seat anchors after an accident (Isofix,
Top Tether)“, page 105
♦ ⇒ „1.20 Checking belt-fastened sensor for rear three-point
seat belts with belt tensioner“, page 105
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
94 Rep. gr.69 - Passenger protection