Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2.4 Removing and installing trim panel
♦ Removing
– Carefully prise out the trim panel -1- in arrow direction.
– Pull off the trim panel -1- to the front.
♦ Installing
– Install the trim panel -1- in the reverse order of removal.
2.5 Removing and installing insulation
1 - Insulation
♦ Removing
– Remove the door trim
⇒ page 189 .
– Unscrew the holders
-3- (2x).
– Use a screwdriver to
prise off the circlips -2-
(2x).
– Detach the insulation
-1-.
♦ Installing
– Install the insulation -1-
in the reverse order of
removal.
2 - Circlips (2x)
3 - Holder (2x)
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
192 Rep. gr.70 - Trim, insulation