Audi A8 2003 User Manual

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
4 - Side airbag connector
5 - Seat heating connector
6 - Bolts (2x)
7 - Centre armrest
8 - Nuts (2x)
9 - Rear shelf trim
Side airbag connector
WARNING
Heed the safety regulations for pyrotechnic components
⇒ page 94 .
– With the ignition switched on, disconnect the battery earth wire
⇒ Electrical system; Rep. gr. 27 .
– One connector each is provided on the left and right beneath
the rear seat bench.
– Press the retainer tab -2- in arrow direction and unplug the
connector -1-.
– Secure the loose connectors with cable ties.
2.3 Removing and installing centre armrest
♦ Removing
– Remove the rear seat bench ⇒ page 333 .
– Remove the rear seat backrest ⇒ page 334 .
– Unscrew the bolts -2- (2x).
– Disengage the centre armrest -1- from the holders -3- (2x).
♦ Installing
– Install the centre armrest -1- in the reverse order of removal.
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
2. Rear seats 335

Audi A8 2003 Specifications

General

Brand	Audi
Model	A8 2003
Category	Automobile
Language	English