Audi A8 2003 User Manual

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Unscrew the bolts -2- (3x).
– Detach the trim -1-.
♦ Installing
– Install the trim -1- in the reverse order of removal.
1.13 Removing and installing seat side trim holder
1 - Seat side trim holder
♦ Removing
– Remove the seat
⇒ page 282 .
– Attach the holder for
seat repair -VAS 6136-
to the engine and gear‐
box holder -VAS 6095- .
– Attach the front seat to
the holder for seat repair
-VAS 6136- .
– Remove the seat side
trim on the sill panel side
⇒ page 292 .
– Remove the seat side
trim on the tunnel side
⇒ page 293 .
– Remove the front trim
⇒ page 293 .
– Unscrew the nuts -2-
(2x).
– Take out the bolts -3-
(2x).
– Unscrew the bolts -5-
(2x).
– Use a screwdriver to
press in the tab -4- and
disengage the hold‐
er -1- in arrow direction.
– Unfasten the holder -1-
on the other side in the
same manner and de‐
tach the holder -1-.
♦ Installing
– Install the seat side trim
holder -1- in the reverse
order of removal.
2 - Nuts (2x)
3 - Bolts (2x)
4 - Tabs (2x)
5 - Bolts (4x)
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
294 Rep. gr.72 - Seat frames

Audi A8 2003 Specifications

General

Brand	Audi
Model	A8 2003
Category	Automobile
Language	English