Audi A8 2003 - Exploded View of Door Trim Cable Routing; Removing and Installing Front Door Trim

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.2 Exploded view of door trim cable routing
1 - Cable to central locking
switch (driver side only)
2 - Cable to interior door han‐
dle light
3 - Cable to mirror adjustment
switch
4 - Cable to window regulator
switch
5 - Connector for window reg‐
ulator switch module and mir‐
ror adjustment switch
6 - Cable to anti-theft alarm
system lighting
7 - Cable to interior monitor
switch module
8 - Cable to door warning light
9 - Cable to exit light
10 - Cable to window regulator
control unit cable
11 - Filler neck compartment
lid/rear lid release switch mod‐
ule connector
12 - Cable to filler neck com‐
partment lid/rear lid release
switch module
1.3 Removing and installing front door trim
Special tools and workshop equipment required
♦ Torque wrench -V.A.G 1410-
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
176 Rep. gr.70 - Trim, insulation