Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.11 Removing and installing side trim on tunnel side
1 - Front seat
2 - Side trim, tunnel side
♦ Removing
– Remove the seat
⇒ page 282 .
– Attach the holder for
seat repair -VAS 6136-
to the engine and gear‐
box holder -VAS 6095- .
– Attach the front seat to
the holder for seat repair
-VAS 6136- .
– Unscrew the bolts -3-
(2x).
– Unscrew the bolt -4-.
– Disengage the side
trim -2- at the front trim
-5-.
– Pull off the side trim -2-
to the rear.
3 - Bolts (2x)
4 - Bolt
5 - Front trim
1.12 Removing and installing front trim
♦ Removing
– Remove the seat ⇒ page 282 .
– Attach the holder for seat repair -VAS 6136- to the engine and
gearbox holder -VAS 6095- .
– Attach the front seat to the holder for seat repair -VAS 6136- .
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
1. Front seats (memory seat, electrically operated seat) 293