Audi A8 2003 - Dismantling and Assembling Centre Armrest (One-Piece)

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
4.2 Dismantling and assembling centre armrest (one-piece)
1 - Bracket
❑ Removing and installing
⇒ page 78
2 - Bush
❑ For bracket
⇒ Item 1 (page 77)
3 - Pivot pin
4 - Securing clip
❑ Always renew after re‐
moving
5 - Pin
6 - Stop
❑ Removing and installing
⇒ page 79
7 - Bush
❑ For carrier
⇒ Item 8 (page 77)
8 - Carrier
❑ Removing and installing
⇒ page 80
9 - Bolts (2x), 2 Nm
10 - Padding
❑ Removing and installing
⇒ page 81
11 - Trim strip
❑ Discontinued
12 - Cover
❑ Removing and installing
⇒ page 82
13 - Pin
14 - Gas strut
❑ Removing and installing ⇒ page 82
15 - Securing clip
❑ Always renew after removing
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
4. Front centre armrest (one-piece) 77