Audi A8 2003 - Removing and Installing Armrest

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.7 Removing and installing armrest
1 - Armrest
♦ Removing
– Remove the door trim
⇒ page 176 and
⇒ page 176 .
– Remove the insulation
⇒ page 176 and
⇒ page 181 .
– Unscrew the bolts -4-
(2x).
– Unscrew the bolts -3-
(9x).
– Unclip the connector
guide -5- from the door
trim -2-.
– Unplug the connector
-6-.
– Detach the connector
guide -5- from the con‐
nector -6-.
– Detach the armrest -1-.
♦ Installing
– Install the armrest -1- in
the reverse order of re‐
moval.
2 - Door trim
3 - Bolts (9x)
4 - Bolts (2x)
5 - Connector guide
6 - Connector for window reg‐
ulator switch module and mir‐
ror adjustment switch
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
182 Rep. gr.70 - Trim, insulation