Audi A8 2003 - Removing and Installing Head Restraint Cover and Padding; Removing and Installing Head Restraint Cover and Pad- Ding

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.11 Removing and installing head restraint
cover and padding
– Remove the head restraint ⇒ page 315 .
– Use a screwdriver to prise out the fastening strips -2- (4x).
– Detach the cover and padding -1-.
– Take the padding -2- out of the cover -3-.
♦ Installing:
– Insert the padding -2- in the proper position in the cover -3-.
– Slide the head restraint mount -1- into the padding with cover.
– Press the fastening strips firmly into the guide slot (check by
pulling).
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
1. Front seat covers and padding (memory seat, electrically operated seat) 369