6 Trim panels
Block diagram
♦ ⇒ „6.1 Removing and installing upper A-pillar trim“,
page 250
♦ ⇒ „6.2 Removing and installing roof grab handle“, page 251
♦ ⇒ „6.3 Removing and installing lower A-pillar trim“,
page 253
♦ ⇒ „6.4 Removing and installing upper and lower A-pillar inter‐
mediate piece“, page 253
♦ ⇒ „6.5 Removing and installing foot rest“, page 253
♦ ⇒ „6.6 Removing and installing upper B-pillar trim“,
page 254
♦ ⇒ „6.7 Removing and installing lower B-pillar trim“,
page 256
♦ ⇒ „6.8 Removing and installing C-pillar trim“, page 256
♦ ⇒ „6.9 Removing and installing rear wheel housing trim“, page
258
♦ ⇒ „6.10 Removing and installing D-pillar trim“, page 258
♦ ⇒ „6.11 Removing and installing coat hook“, page 260
♦ ⇒ „6.12 Removing and installing narrow D-pillar trim“,
page 260
♦ ⇒ „6.13 Removing and installing roof end trim “, page 262
♦ ⇒ „6.14 Removing and installing rear shelf“, page 262
♦ ⇒ „6.15 Removing and installing electric rear window sun
blind“, page 264
♦ ⇒ „6.16 Removing and installing rear shelf replacement parts“,
page 266
♦ ⇒ „6.17 Removing and installing floor covering“, page 267
♦ ⇒ „6.18 Removing and installing box for tool kit and hazard
warning triangle“, page 268
♦ ⇒ „6.19 Removing and installing rear lid trim“, page 269
♦ ⇒ „6.20 Removing and installing emergency release handle“,
page 270
♦ ⇒ „6.21 Removing and installing grip moulding“, page 271
♦ ⇒ „6.22 Removing and installing button to close rear lid in lug‐
gage compartment E406 “, page 271
♦ ⇒ „6.23 Removing and installing rear cross panel trim“,
page 272
♦ ⇒ „6.24 Removing and installing luggage compartment side
trim“, page 273
♦ ⇒ „6.25 Removing and installing luggage compartment sock‐
et“, page 274
♦ ⇒ „6.26 Removing and installing ventilation grille“, page 274
♦ ⇒ „6.27 Separating luggage compartment side trim and drip
rail trim/assembling“, page 275
♦ ⇒ „6.28 Removing and installing back panel trim“, page 275
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
6. Trim panels 249