Audi A8 2003 - Removing and Installing Outer Seat Belt Retainer; Removing and Installing Head Restraint

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
3.25 Removing and installing outer seat belt
retainer
– Guide the webbing -5- out of the webbing holder -4-.
– Disengage the webbing holder -4- at the lug -3-.
– Pull the webbing holder -4- forwards in arrow direction.
– Unscrew the nut -2-. Tightening torque 55 Nm.
– Take out the seat belt retainer -1-.
3.26 Removing and installing head restraint
♦ Removing
– Press the button -2-.
– Lift out the head restraint -1-.
♦ Installing
– Install the head restraint -1- in the reverse order of removal.
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
358 Rep. gr.72 - Seat frames