Audi A8 2003 User Manual

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1 - Cover
♦ Removing
– Unfasten the fastening
strip -6-.
– Lift the front of the cover
-1-.
– Use an awl -V.A.G 1636
A- -2- to prise the fas‐
teners -3- out of the
plastic clips -4-.
– Detach the cover -1-
from the padding -5-.
♦ Installing
– Replace damaged plas‐
tic clips.
– Start by pressing the
transverse rod fasten‐
ers into the plastic clips.
– Fit the cover in the re‐
verse order of removal.
2 - Awl -V.A.G 1636 A-
3 - Fastener
4 - Plastic clips
5 - Padding
6 - Fastening strip
1.2 Removing and installing seat cushion
extension trim
♦ Removing
– Pull out the trim -1- in arrow direction.
♦ Installing
– Install the trim -1- in the reverse order of removal.
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
362 Rep. gr.74 - Seat - padding, covers

Audi A8 2003 Specifications

General

Brand	Audi
Model	A8 2003
Category	Automobile
Language	English