Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1 - Cover and padding
❑ Lift the cover and pad‐
ding -1-.
❑ Release the fasteners
-3- (2x) from the clips
-2- (2x).
❑ Unplug the seat pan
heating connector -5-.
❑ Unplug the seat side
padding heating con‐
nector -6-.
❑ Detach the cover and
padding -1-.
❑ Guide the
fasteners -3- (2x) out of
the cover tabs -4- (2x).
♦ Installing
– Install the cover and
padding -1- in the re‐
verse order of removal.
2 - Clips (2x)
3 - Fastener (2x)
4 - Cover tabs (2x)
5 - Seat pan heating connector
6 - Seat side padding heating
connector
1.1.2 Separating cover from padding
Special tools and workshop equipment required
♦ Awl -V.A.G 1636 A-
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
1. Front seat covers and padding (memory seat, electrically operated seat) 361
To Next Page
Loading...
