Audi A8 2003 - Removing and Installing Armrest; Removing and Installing Window Regulator Switch Module

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2.6 Removing and installing armrest
1 - Armrest
♦ Removing
– Remove the door trim
⇒ page 189 .
– Remove the insulation
⇒ page 192 .
– Unscrew the bolts -2-
(9x).
– Unscrew the bolts -3-
(2x).
– Unplug the connector
for the window regulator
switch module -4-.
– Detach the armrest -1-.
♦ Installing
– Install the armrest -1- in
the reverse order of re‐
moval.
2 - Bolts (9x)
3 - Bolts (2x)
4 - Connector for window reg‐
ulator switch module
2.7 Removing and installing window regula‐
tor switch module
Special tools and workshop equipment required
♦ Torque wrench -V.A.G 1410-
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
2. Rear door trim panels 193