Audi A8 2003 User Manual

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.7 Removing and installing seat heating el‐
ement (sports seat)
Note
The centre section seat heating element -1- is stitched to the cov‐
er. The cover must be replaced if the heating element is defective.
– Remove the seat ⇒ page 282 .
– Attach the holder for seat repair -VAS 6136- to the engine and
gearbox holder -VAS 6095- .
– Attach the front seat to the holder for seat repair -VAS 6136- .
– Remove the backrest ⇒ page 288 .
– Remove the seat pan cover and padding ⇒ page 360 .
– Replace the cover with seat heating element.
1.8 Removing and installing seat side pad‐
ding heating elements (bonded)
– Remove the seat ⇒ page 282 .
– Attach the holder for seat repair -VAS 6136- to the engine and
gearbox holder -VAS 6095- .
– Attach the front seat to the holder for seat repair -VAS 6136- .
– Remove the backrest ⇒ page 288 .
– Remove the seat pan cover and padding ⇒ page 360 .
– Remove the side padding ⇒ page 363 .
– Cut off the cables -1- (2x) at the locations marked -A- (2x).
– Align the heating elements -2- (2x) on the seat side padding
-3- (2x), detach the backing and bond the heating elements
onto the surface of the padding.
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
1. Front seat covers and padding (memory seat, electrically operated seat) 367

Audi A8 2003 Specifications

General

Brand	Audi
Model	A8 2003
Category	Automobile
Language	English