Audi A8 2003 User Manual

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
All vehicles (continued)
– Unscrew bolts -5- (2x).
– Remove bolt -4-.
– Unscrew Torx bolts -3- (2x) using special screwdriver T8 -
T40056 A- .
– Separate trim (top) -2- for steering column switch module from
trim (bottom) -1- and detach both parts.
Installing
Installation is carried out in reverse order; note the following:
– Engage upper trim in hooks of lower trim, press both parts to‐
gether and screw them on.
1.8.1 Tightening torques
3 - Torx bolt T8, 0.5 Nm
4 - Bolt, 4 Nm
5 - Bolt, 4 Nm
Bolt for handle (mechanically adjustable steering column): 3 Nm
1.9 Removing and installing coin holder
Special tools and workshop equipment required
♦ Removal wedge -3409-
♦ Hook -3438-
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
1. Shelves / trim panels 13

Audi A8 2003 Specifications

General

Brand	Audi
Model	A8 2003
Category	Automobile
Language	English