Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Backrest adjustment motor preliminary steps
– Use a screwdriver to align the locking pin of the splines -1- with
the shaft of the backrest frame.
1.26 Removing and installing upper backrest cover panel
1 - Upper backrest cover panel
♦ Removing
– Move the upper back‐
rest forwards as far as it
will go.
– Unfasten the clips -2-
(4x): Insert a flat screw‐
driver in the clip and turn
it clockwise until the clip
is released.
– Disengage the backrest
cover panel -1- upwards
from the holders -3-
(2x).
♦ Installing
– Install the upper back‐
rest cover panel -1- in
the reverse order of re‐
moval.
2 - Clips (4x)
3 - Holder (2x)
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
1. Front seats (memory seat, electrically operated seat) 309
To Next Page
Loading...
