Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.11 Checking seat belts
WARNING
The seat belt system is always to be subjected to systematic
checking after an accident. If the test items reveal damage,
customers are to be made aware of the need for belt replace‐
ment.
Test items
♦ Checking webbing ⇒ page 102
♦ Checking automatic belt retractor (locking action)
⇒ page 103
♦ Visual inspection of buckle ⇒ page 104
♦ Functional test of buckle ⇒ page 104
♦ Checking guide fittings and latch plate ⇒ page 104
♦ Checking fastening elements and anchorage points
⇒ page 104
♦ Checking child seat restraint function for additional child seats
(not for driver's seat belt) - country-specific ⇒ page 105
Caution
If customers refuse to have damaged seat belts replaced, an
appropriate note to this effect is to be made in the Service
booklet.
1.12 Checking webbing
Sequence of operations
– Pull the webbing as far as it will go out of the automatic belt
retractor or lap belt adjuster.
– Check the webbing for dirt and, if necessary, wash with mild
soap solution ⇒ Owner's manual .
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
102 Rep. gr.69 - Passenger protection
To Next Page
Loading...
