Audi A8 2003 User Manual

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.12 Removing and installing door warning
light and footwell light
– Remove the door trim ⇒ page 176 .
– Use a screwdriver to prise out the door warning light -1- from
underneath and pull out the door warning light -1- with the ca‐
ble.
– Unplug the connector at the door warning light -1-.
– Use a screwdriver to prise out the exit light -2- at the front and
pull out the exit light -2- with the cable.
– Unplug the connector at the exit light -2-.
1.13 Removing and installing interior monitor
switch module
♦ Door trim removed:
– Press out the interior monitor switch module -1- from the in‐
side.
– Unplug the connectors -2- and -3-.
♦ Door trim fitted:
– Use a screwdriver to carefully prise out the interior monitor
switch module -1- from above.
– Unplug the connectors -2- and -3-.
1.14 Removing and installing hinged pocket
with mount
Special tools and workshop equipment required
♦ Torque wrench -V.A.G 1783/-
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
1. Front door trim panels 185

Audi A8 2003 Specifications

General

Brand	Audi
Model	A8 2003
Category	Automobile
Language	English