Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.2 Removing and installing refrigerator box
Removing
– Fold down the centre armrest and open the refrigerator box.
– Release the clips on the left and right -arrow 1-.
– Detach the trim frame at the refrigerator box -arrow 2-. This
involves closing the hinged cover for the refrigerator box again
slightly.
– Slacken off the bolts -2- by approx. 2 turns.
– Pull out the clamping elements -1- over the guide.
– Open the luggage compartment and fold back the floor cov‐
ering.
– Unplug the connector -arrow-.
– Take the refrigerator box -1- out of the luggage compartment.
Installing
Install in reverse order, paying attention to the following:
– Move the refrigerator box to the installation position.
– Open the refrigerator box.
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
1. Servicing refrigerator box 385
To Next Page
Loading...
