Audi A8 2003 User Manual

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
9 Servicing seat-occupied sensor for
front passenger's airbag deactivation
(country-specific)
Block diagram
♦ ⇒ „9.1 Removing and installing seat occupied sensor“,
page 156
♦ ⇒ „9.2 Replacing rigid foam inserts“, page 161
9.1 Removing and installing seat occupied
sensor
Special tools and workshop equipment required
♦ Torque wrench -V.A.G 1783-
WARNING
Heed the safety regulations for pyrotechnic components
⇒ page 94 .
WARNING
The replacement part (service kit) for the seat-occupied sensor
is already pre-calibrated and is never to be separated. The
service kit consists of the:
♦ Seat occupied recognition control unit -J706-
♦ Pressure sensor for seat occupied recognition -G452-
♦ Seat occupied sensor mat
♦ Seat padding
♦ Wiring harness
WARNING
The seat cover must also be replaced on replacing the service
kit in the A8. The seat cover must be ordered separately.
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
156 Rep. gr.69 - Passenger protection

Audi A8 2003 Specifications

General

Brand	Audi
Model	A8 2003
Category	Automobile
Language	English