Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
♦ Torque wrench -V.A.G 1783-
♦ Removing
– Remove the lower A-pillar trim ⇒ page 253 .
– Unscrew the bolt -1-.
♦ Tightening torque 4 Nm.
– Unfasten the foot rest -3- from the clips -2- (2x).
♦ Installing
– Install the foot rest -1- in the reverse order of removal.
6.6 Removing and installing upper B-pillar
trim
WARNING
Heed the safety regulations for pyrotechnic components
⇒ page 94 .
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
254 Rep. gr.70 - Trim, insulation
To Next Page
Loading...
