Audi A8 2003 - Removing and Installing Rear Seat Bench

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2.1 Removing and installing rear seat bench
1 - Rear seat bench
♦ Removing
– Raise the rear seat
bench -1- and pull out
the rear seat bench -1-
to the front.
– Seat heating: Unplug
the connector.
♦ Installing
Caution
The mounting sockets
are always to be re‐
placed after removing
the seat bench
⇒ page 333
– Engage the fasteners
-2- (4x) in the plastic
sleeves -3- (4x).
– Press down the rear
seat bench -1-.
2 - Fasteners (4x)
3 - Plastic sleeves (4x)
❑ Replace
Replacing plastic sleeves (4x)
– Take the old mounting sockets out of the body opening.
– Insert the new mounting sockets -2- in the body opening -1-
until they are heard to engage.
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
2. Rear seats 333