Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.10 Removing and installing side trim on sill panel side
1 - Front seat
2 - Front trim
3 - Bolt
4 - Connector
5 - Side trim, sill panel side
♦ Removing
– Remove the seat
⇒ page 282 .
– Attach the holder for
seat repair -VAS 6136-
to the engine and gear‐
box holder -VAS 6095- .
– Attach the front seat to
the holder for seat repair
-VAS 6136- .
– Unscrew the bolts -6-
(2x).
– Unscrew the bolt -3-.
– Disengage the side
trim -5- at the front trim
-2-.
– Detach the side trim -5-,
starting from the switch
side.
– Unplug the connector
-4-.
6 - Bolts (2x)
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
292 Rep. gr.72 - Seat frames