Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
♦ Airbag adapter -VAS 6229-
1.1 Removing and installing seat
Special tools and workshop equipment required
♦ Torque wrench -V.A.G 1331/-
Note
♦
Before disconnecting the battery: Establish the radio unit
code.
♦
To remove the driver's seat: Move the steering wheel to the
front and upwards as far as it will go.
♦
Removal of the backrest cover panels on convenience seats
involves moving the upper backrest adjuster forwards.
♦
Move the height adjuster and seat angle adjuster into the top
position and the backrest to the 90° position.
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
282 Rep. gr.72 - Seat frames
To Next Page
Loading...
