Audi A8 2003 - Removing and Installing Front Centre Console Cup Holder; Removing and Installing Front Centre Console Cup Hold- er

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Removing centre console cup holder
– Unscrew bolts -1- (4x).
– Detach front centre console cup holder -2- from trim for centre
console with multimedia operating unit -3-.
Installing
Install in reverse order of removal.
Tightening torques
Refer to appropriate section for tightening torques.
2.10 Removing and installing front centre
console cup holder
Special tools and workshop equipment required
♦ Torque wrench -V.A.G 1783/-
Removing
– Remove trim for centre console with multimedia operating unit
⇒ page 33 .
– Unscrew bolts -1- (4x).
– Detach front centre console cup holder -2- from trim for centre
console with multimedia operating unit -3-.
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
34 Rep. gr.68 - Interior equipment