Audi A8 2003 - Removing and Installing Luggage Compartment Floor Covering

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
6.29 Removing and installing luggage compartment floor covering
1 - Luggage compartment floor
covering
♦ Removing
– Unscrew the clip nuts
-5-.
– Lift the luggage com‐
partment floor covering
-1- in arrow direction
and take it out of the ve‐
hicle.
♦ Installing
Install in reverse order.
2 - Mounting for luggage com‐
partment floor covering retain‐
er
3 - Luggage compartment floor
covering retainer
4 - Handle on luggage com‐
partment floor covering retain‐
er
♦ Removing
– Lift the handle -4- of the
retainer -3-.
– Lift the retainer -3- by
way of the handle -4- out
of the mounting -2-.
♦ Installing
Install in reverse order.
5 - Clip nut
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
6. Trim panels 277