Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Screw out the bolts -arrows-.
Note
Use adhesive tape to affix a cloth to protect the steering column
trim and steering arms.
– Pull the trim slightly away from the dash panel insert.
– Unplug the connectors at the trim for the dash panel insert.
– Engage the turn signal indicator switch in the lower switch po‐
sition.
– Actuate the flick wipe function and detach the trim for the dash
panel insert in this wiper switch position.
Installing
Install in reverse order.
Tightening torque:
Dash panel insert/trim for dash panel insert to dash panel: 3 Nm
3.6 Removing and installing trim panel for
display unit for front information display
and operating unit control unit -J685-
Special tools and workshop equipment required
♦ Removal wedge - 3409-
♦ Hook -3438-
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
216 Rep. gr.70 - Trim, insulation
To Next Page
Loading...
