Audi A8 2003 - Removing and Installing Centre Head Restraint; Removing and Installing Centre Head Restraint Blind

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2.8 Removing and installing centre head re‐
straint
♦ Removing
– Remove the rear seat bench ⇒ page 333 .
– Remove the rear seat backrest ⇒ page 334 .
– Unscrew the bolts -3- (2x).
– Disengage the centre head restraint -1- downwards from the
holders -2- (2x) and take out the centre head restraint -1-.
♦ Installing
– Install the centre head restraint -1- in the reverse order of re‐
moval.
2.9 Removing and installing centre head re‐
straint blind
♦ Removing
– Remove the rear seat bench ⇒ page 333 .
– Remove the rear seat backrest ⇒ page 334 .
– Remove the centre head restraint ⇒ page 338 .
– Prise out the blind -2- on the left and right at the locations
marked -1- (2x).
– Disengage the blind -2- on the left and right at the locations
marked -3- (2x) and detach the blind -2-.
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
338 Rep. gr.72 - Seat frames