Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
♦ Removing
– Remove the rear seat bench ⇒ page 333 .
– Remove the rear seat backrest ⇒ page 334 .
– Screw the bolts -2- (2x) out of the centre mount -1-.
♦ Tightening torque 8 Nm.
2.7 Removing and installing head restraints
Note
The rear left and right head restraints are not identical to the front
head restraints. All head restraints are to be marked with adhe‐
sive tape on removal.
1 - Outer head restraints
– Press the button -2- and
lift out the head restraint
-1-.
2 - Button
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
2. Rear seats 337
To Next Page
Loading...
