Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1 - Centre armrest
❑ Split version
♦ Removing
– Switch off ignition.
– Swivel centre armrest
-1- upwards.
– Detach upper support
trim -9-.
– Unscrew bolts -3- (2x).
– Detach centre armrest
-1- from lower support
-6-.
♦ Installing
Install in reverse order of re‐
moval.
2 - Upper support
❑ Included in scope of de‐
livery of centre armrest
3 - Bolts (2x), 18 Nm
4 - Centre console
5 - Nuts (4x), 18 Nm
6 - Lower support
❑ Removing and installing
⇒ page 85
7 - Storage compartment
❑ Removing and installing
⇒ page 39
8 - Grommet
9 - Upper support trim
❑ Clipped in
5.2 Removing and installing lower support
(split centre armrest)
Special tools and workshop equipment required
♦ Torque wrench -V.A.G 1410-
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
5. Front centre armrest (split) 85
To Next Page
Loading...
