Audi A8 2003 - Motor; Removing and Installing Upper Backrest Adjustment Motor V232

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
3.22 Removing and installing upper backrest adjustment motor -V232-
1 - Bolts (2x)
❑ Tightening torque 6 Nm.
2 - Connector
3 - Backrest frame
4 - Upper backrest adjustment
motor -V232-
♦ Removing
– Remove the seat pan
⇒ page 342 .
– Remove the individual
rear seat ⇒ page 343 .
– Unclip the connector
-2- from the backrest
frame and unplug the
connector.
– Unscrew the bolts -1-
(2x).
– Take out the upper
backrest adjustment
motor -4-.
♦ Installing
– Install the upper back‐
rest adjustment motor
-4- in the reverse order
of removal.
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
3. Electrically operated individual rear seats 355