Audi A8 2003 - Removing and Installing Cover and Padding for Rear Seat Bench

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2.1 Removing and installing cover and pad‐
ding for rear seat bench
2.1.1 Separating cover and padding from seat pan
1 - Awl -V.A.G 1636 A-
2 - Fastener
3 - Plastic clips
4 - Padding
♦ Removing
– Remove the rear seat
bench ⇒ page 333 .
– Use a screwdriver to
prise out the all-round
fastening strips -5-.
– Detach the cover and
padding from the seat
pan.
♦ Installing
– Fit the cover and pad‐
ding in the reverse order
of removal.
5 - All-round fastening strips
6 - Cover
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
2. Rear seat covers and padding 371