Audi A8 2003 - Page 125

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1 - Right belt buckle
❑ Always replace belt
buckle after belt ten‐
sioner triggering with
belt fastened
♦ Removing
– Remove the rear seat
bench ⇒ page 333 .
– Unscrew the bolt -2-.
– Detach the buckle -1-
and the lap belt -3-.
♦ Installing
– Always use genuine
bolts.
– Make sure the buckle
and the lap belt anchor‐
age point engage in the
locating studs.
2 - Bolt
❑ Tightening torque 55
Nm.
3 - Lap belt with anchorage
point
4 - Left buckles and lap belt
❑ Always replace belt
buckle after belt ten‐
sioner triggering with
belt fastened
♦ Removing
– Remove the rear seat
bench ⇒ page 333 .
– Unscrew the bolt -5-.
– Detach the buckles -4-.
♦ Installing
– Always use genuine bolts.
– Make sure the buckles engage in the locating studs.
5 - Bolt
❑ Tightening torque 55 Nm.
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
2. Seat belts 115