Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– If fitted, remove CD changer as follows:
– Insert two keys of radio release tool -T10057- into front of CD
changer.
♦ Top L - top left
♦ Top R - top right
– Pull CD changer out of mounting frame.
– Unplug electrical connector.
– Unplug connector for optical fibre.
– Cover open wiring harness connector -2- of optical fibre cable
with protective cap -VAS 6223/9- -Item 1-.
Note
The protective cap is designed to prevent the end face of the op‐
tical fibre from becoming soiled or damaged, as this would impair
light transmission.
– Press catches on CD changer and pull release keys out of CD
changer.
– If fitted, remove storage compartment from glove box. To do
so, use small screwdriver to release retaining tabs -1- and
-2- in -direction of arrow-.
– Pull storage compartment out of glove box.
– Remove bolts -arrows-.
– Remove bolts -1- and -2-.
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
6 Rep. gr.68 - Interior equipment
To Next Page
Loading...
