Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
♦ Torque wrench -V.A.G 1783-
Removing
– Raise the fastening ring.
– Screw out the bolts -2-.
– Detach the fastening ring -1-.
Installing
Install in reverse order.
Tightening torque:
⇒ Item 5 (page 273)
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
6. Trim panels 279
To Next Page
Loading...
