Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
♦ Torque wrench -V.A.G 1331/-
1.18.1 Removing seat with defective longitudi‐
nal adjustment motor
Note
♦
If possible: Move the seat upwards.
♦
To remove the driver's seat: Move the steering wheel to the
front and upwards as far as it will go.
1 - Front seat
♦ Removing
– Detach the trim -12-.
– Unscrew the bolts -13-
(4x).
– Fold the seat -1- for‐
wards.
– Unscrew the bolts -14-
(2x).
– Unscrew the bolt -6-.
– Unclip the connector
-5- from the retainer -4-.
– Unclip the connector
-11- from the retain‐
er -4-.
– Unfasten the wiring har‐
ness -9- at the clips
-10- and -7-.
– Unplug the connector
-8- at the seat longitudi‐
nal adjustment motor.
– Take the backrest with
seat pan out of the vehi‐
cle with the assistance
of a second mechanic.
♦ Installing
WARNING
Ensure correct operation
of the safety latch
⇒ page 301 .
– Install the front seat -1-
in the reverse order of
removal.
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
1. Front seats (memory seat, electrically operated seat) 297
To Next Page
Loading...
