Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2 - Backrest heating element connector
3 - Lower fastening strips (5x)
4 - Seat side padding heating element connector
5 - Fastening strips (8x)
1.4.2 Separating cover from padding
Special tools and workshop equipment required
♦ Awl -V.A.G 1636 A-
1 - Cover
♦ Removing
– Unfasten the velcro
strips -2- (2x).
– Unfasten the fastening
strips -3- (2x).
– Use an awl -V.A.G
1636A- -6- to prise the
fasteners -4- out of the
plastic clips -5-.
– Detach the cover -1-
from the padding -7-.
♦ Installing
– Replace damaged plas‐
tic clips.
– Start by pressing the
transverse rod fasten‐
ers into the plastic clips.
– Fit the cover in the re‐
verse order of removal.
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
1. Front seat covers and padding (memory seat, electrically operated seat) 365
To Next Page
Loading...
