Audi A8 2003 - Page 388

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
♦ Upholstery clip pliers -V.A.G 1634-
1 - Awl -V.A.G 1636A-
2 - Fastener
3 - Plastic clips
4 - Connector
5 - Upholstery clips (6x)
6 - Connector
7 - All-round fastening strips
8 - Cover and padding
♦ Removing
– Remove the seat pan
⇒ page 342 .
– Pinch off the upholstery
clips -5- (6x).
– Use a screwdriver to
prise out the all-round
fastening strips -7-.
– Unplug the connectors
-4- and -6-.
– Detach the cover and
padding -8-.
♦ Installing
– Install the cover and
padding -8- in the re‐
verse order of removal.
– Fit the new upholstery
clips -5- using the up‐
holstery clip pliers -
V.A.G 1634- .
3.1.2 Separating cover from padding
Special tools and workshop equipment required
Audi A8 2003 ➤
General body repairs, interior - Edition 07.2011
378 Rep. gr.74 - Seat - padding, covers