(39) Fill cooling system to proper level with the
appropriate coolan t.
(40) Eva cuat e and r echar ge air condit ioning.
(41) Check and refill all ancillary system fluid lev-
els.
(42) Star t en gin e and inspect for leaks (Refer to 14
- FUEL SYSTEM - WARNING).
SPECIFICATIONS - TORQUE SPECIFICATIONS
2.7L DIESEL
DESCRIPTION N·m Ft. Lbs. In. Lbs.
Crankcase Ventilation
Screw-Air Charge Distri-
bution Pipe to Air Charge
Distribution Panel
11 - 97
Cylinder Head
8m-Bolt- Cylinder Head to
Timing Case Cover
20 15 -
Bolt-Front Cover to Cylin-
der Head
14 - 124
12m-Bolt-Cylinder Head
to Crankcase (3 stages,
torque, torque angle,
torque angle)
60, 90°, 90° 44, 90°,90° -
Crankcase, Timing Case
Cover, End Cover
Bolt-Crankshaft Bearing
Cap to Crankcase (2
stages, torque, torque an-
gle)
55, 90° 40, 90° -
Bolt-End Cover to Crank-
case
9 - 80
Bolt-Timing Case Cover
to Crankcase
20 15 -
Plug-Coolant Drain to
Crankcase
30 22 -
Oil Pan
6m-Bolt-Oil Pan to Crank-
case
9 - 80
8m-Bolt-Oil Pan to Crank-
case
20 15 -
Bolt-Oil Pan to End Cover 9 - 80
Bolt-Oil Pan to Timing
Case Cover
9 - 80
Bolt-Oil Pan to Transmis-
sion Bell Housing
40 30 -
Plug-Oil Pan to Oil Drain 47 35 -
Connecting Rod
VA ENGINE 9 - 11
To Next Page
Loading...
