(13) Posit ion Bea rin g Remover 9082 (1) (Fig. 42)
over th e inn er ra ce of th e output sh aft bearing (3).
(14) Slide the collar (3) (Fig. 43) on the Bear ing
Remover 9082 (1) downwar d over t he fingers (4) of
the t ool.
(15) Remove the ou tput shaft bea ring (3) (Fig. 44).
(16) Remove the geart rain en d-play shim from th e
output shaft. Be su re to tag the shim sin ce it is ver y
similar to the out put shaft washer and th ey must not
be in terch anged.
Fig. 43 Slide Remover 9082 Collar Downward
1 - BEARING REMOVER 9082
2 - TRANSMISSION CASE
3 - COLLAR
4 - FINGERS
Fig. 44 Remove Output Shaft Bearing
1 - BEARING REMOVER 9082
2 - TRANSMISSION CASE
3 - OUTPUT SHAFT BEARING
21 - 48 AUTOMATIC TRANSMISSION NAG1 - SERVICE INFORMATION VA
To Next Page
Loading...
