(6) In st all the headrest sleeves.
(7) In st all the headrest s. (Refer to 23 - BODY/
SE ATS/HE ADREST - INSTALLATION)
(8) In st all the seat belt bu ckles. (Refer to 8 -
ELECTRICAL/RESTRAINTS/RE AR SEAT BELT
BUCKLE - INSTALLATION)
(9) In st all th e seat belt s. (Refer t o8-ELECTRI-
CAL/RESTRAINTS/REAR SEAT BELT & RETRAC-
TOR - INSTALLATION)
(10) Install th e seat back shield. (Refer to 23 -
BODY/SEATS/REAR SEAT BACK SHIELD -
INSTALLATION)
(11) In st all sea t. (Refer to 23 - BODY/SE ATS/
SE AT - REAR - INSTALLATION)
SEAT CU SH I ON / COV ER -
REAR
REMOVAL
(1) Remove seat . (Refer to 23 - BODY/SEATS/
SE AT - REAR - RE MOVAL)
(2) Remove sea t back sh ield. (Refer to 23 - BODY/
SE ATS/REAR SEAT BACK SHIELD - REMOVAL)
(3) Remove the lower sea t belt anch ors as neces-
sa ry. (Refer to 8 - ELE CTRICAL/RE STRAINTS/
REAR SEAT BELT & RETRACTOR - REMOVAL)
(4) Remove seat belt buckles as n ecessary. (Refer
to 8 - ELECTRICAL/RESTRAINTS/REAR SEAT
BELT BUCKLE - REMOVAL)
(5) Partially de-trim lower part of seat ba ck.
(6) Sepa rat e t he cushion /cover j-stra ps and remove
the seat cushion and cover from sea t frame.
INSTALLATION
(1) In st all seat cush ion and cover.
(2) Connect the cover j-st raps.
(3) Position seat ba ck cover, back.
(4) In st all the seat belt bu ckles. (Refer to 8 -
ELECTRICAL/RESTRAINTS/RE AR SEAT BELT
BUCKLE - INSTALLATION)
(5) In st all the seat belt anch ors. (Refer to 8 -
ELECTRICAL/RESTRAINTS/RE AR SEAT BELT &
RETRACTOR - INSTALLATION)
(6) In st all the seat back shield. (Refer to 23 -
BODY/SEATS/REAR SEAT BACK SHIELD -
INSTALLATION)
(7) In st all seat. (Refer to 23 - BODY/SEATS/SEAT
- REAR - INSTALLATION)
VA SEA TS 23 - 83
To Next Page
Loading...
