BODY ST RU CT U RE
TABLE OF CONTENTS
page page
GAP AND FLUSH
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . 91
OPENING DIMENSIONS
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . 93
GAP AN D FLU SH
SPECIFICATIONS
GAP & FLU SH DI M EN SI ON S I N DEX
DESCRIPTION FIGURE
FRONT DOORS 1
SLIDING DOORS 2
REAR DOORS 3
NOTE:
All measurements are in mm.
LOCATION GAP FLUSH
1 Door at top. 7 ±
0.5
FLUSH
2 Door at upper b-pil-
lar.
7±
0.5
Up to max 1
mm recessed,
at rear with 1
mm overlap
(wind noise)
3 Door at bottom. 8 ±
0.5
FLUSH
4 Door at wheelhouse. 7 ±
0.5
FLUSH
5 Door ridge at wheel-
house and b-pillar.
— FLUSH
6 Door at a-pillar. 8 ±
0.5
FLUSH
Fig. 1 FRONT DOOR
VA BODY STRUCTURE 23 - 91
To Next Page
Loading...
