To use this option, the 'My Area Prefix code' must be set in
advance. This option enables the call log to add 'My Area Code'
by setting ON for 'ADD MY AREA CODE' If Incoming CLI is equal
to or shorter than 'LOCAL DIGIT COUNT.' The default is 7 for
North America and 0 for other countries.
To use this option, the 'My Area Prefix code' must be set in
advance. This option selects My Area Code usage by setting ON.
This option is related to 'LOCAL DIGIT COUNT.'
** As we mentioned the rule of 'LD DIGIT COUNT' and 'LOCAL
DIGIT COUNT,' the incoming CLI is followed the above rule. But
in the case of the other cases, the system compares the incoming
CLI with Multi Area Code (PGM 100), and then My Area Prefix
Code will be added to the call log.
To Next Page
Loading...
