iPECS UCP600 - Page 232

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
218
Table 4.4.6.3-1 TERMINAL & CIRCULAR GROUP ATTRIBUTES
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
REPT No Member
If a call is received and no members are on duty, an ICM call will
return the re-order tone, while a CO/IP call will be routed to the
overflow destination.
OFF
ON
OFF
Music Source
A Music source can be assigned so that calls to the group will
receive audio from the assigned source in place of ring-back
tone.
Ring back tone, Internal Music, External Music
VSF MOH, SLT MOH1~5, VSF MOH2~30
Refer to
description
Internal
Music
Allow Forward
Member
A member activating Call forward may be placed in an
unavailable state for Station group calls (ON). When OFF, group
calls are sent to the member as normal (OFF).
OFF
ON
ON
Mailbox Message
Wait Station
When a call overflows or routes to the VM group, a station
number is used to identify the Mailbox for the group messages.
Station
Number
Mailbox Password
The password associated with a group Mailbox is defined here.
The password is used in conjunction with the group Mailbox as
with a normal station.
Max. 12
digits
Forced Forward
Destination
Calls to a Station group may forward directly to a defined
destination, bypassing the hunt process. “Forced Forward,”
below, must be enabled.
STA/NET or Station group, VSF Announcement, Sys. Speed
Refer to
description
Forced Forward
Destination Usage
Calls to a Station group may forward directly to a defined
destination. See above “Forced Forward Destination” when
Forced Forward is enabled for the group.
OFF
ON
OFF
Group Name
A name can be designated for the group.
Max. 12
characters
Maximum Queued
Call Counter
When the number of calls queued to the group match this
parameter, new calls will receive an error tone and be
disconnected after the VSF Announcement 1, if assigned, is
played.
00-99
99
Ring Tone
When a call is routed to a group, the group member's
programmed ring tone is served.
00-16
(00:N/A)
0
Group Ring Back
Tone
When a group member is ringing to the group, The ring-back
tone can be provided to the caller according to the ring-back tone
for the group.
 Ringback tone: ring back tone is provided when the
member of the group is ringing
 MOH: MOH is provided when the member of the group is
ringing.
 MOH (after connection): MOH is provided when the
system answered the call
Refer to
description
Ringback
tone