iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
231
Figure 4.4.6.3-7 iPECS Feature Server Voice Mail Group (UMS-VM) Attributes
Table 4.4.6.3-7 FEATURE SERVER VOICE MAIL GROUP ATTRIBUTES
If all stations in the group are busy when a call is offered, the call
may continue to wait (queue) for an available FS-VM channel. If the
queue period exceeds the VSF Announce 1 Timer, the call is sent to
a VSF announcement. If the timer is set to 000, the call will receive
the first announcement, in full, prior to the station process
(guaranteed announcement).
After the 1st announcement, a 2nd Announcement Timer is activated.
At expiration, if the call remains queued to the group, the call is sent
to the assigned VSF Announce 2 Location.
Each group can be assigned an announcement, which is played if the
call remains queued beyond the VSF Announce 1 Timer duration.
The announcement location is a VSF Announcement number. An
entry of 00 indicates no announcement.
If this attribute is selected, the call will drop after the 1st VSF
announcement.
The Group can be assigned a 2nd announcement, which is played if
the call remains queued beyond the VSF Announce 2 Timer duration.
The announcement location is a VSF Announcement number. An
entry of 00 indicates no announcement.
To Next Page
Loading...
